View MA2D750_989811.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Schottky Barrier Diodes (SBD)
MA2D750
Silicon epitaxial planar type
Unit: mm
For switching mode power supply
9.90.3
4.60.2 2.90.2 3.00.5
13.70.2 4.20.2 Solder Dip
1.5-0.4
* IF(AV) = 10 A rectification is possible * Single type * TO-220D-B1 package
15.00.5
I Features
3.20.1
+0
1.40.2 0.80.1
2.60.1
I Absolute Maximum Ratings TC = 25C
Parameter Repetitive peak reverse-voltage Average forward current Non-repetitive peak forwardsurge-current * Junction temperature Storage temperature Symbol VRRM IF(AV) IFSM Tj Tstg Rating 40 10 60 -40 to +125 -40 to +125 Unit V A A C C
0.550.15
2.540.30 5.080.50 1 2
1 : Cathode 2 : Anode TO-220D-B1 Package
Note) *: The peak-to-peak value in one cycle of 50 Hz sine wave (non-repetitive)
I Electrical Characteristics TC = 25C 3C
Parameter Reverse current (DC) Forward voltage (DC) High voltage rectification Symbol IR VF Rth(j-c) Conditions VR = 40 V, TC = 25C IF = 10 A, TC = 25C Min Typ Max 3 0.55 3.0 Unit mA V C/W
Note) Rated input/output frequency: 10 MHz
Publication date: August 2001
SKH00005AED
1
MA2D750
IF V F IR V R
TC = 125C
105 104 TC = 125C
102
10
Forward current IF (mA)
Reverse current IR (mA)
103 75C 102 10 1 10-1 10-2 10-3 25C -20C
75C 1
10-2
25C
10-3
0
0.2
0.4
0.6
0.8
1.0
1.2
10-4
0
10
20
30
40
50
60
Forward voltage VF (V)
Reverse voltage VR (V)
2
SKH00005AED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of MA2D750

	To Download MA2D750 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .